Tango 4:3 Men Surf Wetsuit
Complete your set
Allowing you to enjoy the waves even at low temperatures, the Tango 4:3 combines 4 mm-thick Yamamoto neoprene in the lower torso with 3 mm neoprene in the upper body. This, together with the Thermal-X inner lining and the sealed seams with inner taping, provides you with maximum thermal insulation. Thanks to the Smoothskin finish on the wrists and neck, the wetsuit's seal prevents cold water from penetrating the interior of the suit.
The best Yamamoto materials, GBS seams, front zip construction and advanced pattern construction all provide you with maximum elasticity on the waves. Technologies such as DS 40+ are incorporated in the shoulders and back for unrestricted paddling.
The elasticity of the materials and the advanced pattern make it easy to put on the wetsuit. The inner linings, such as Thermal-X, are also so pleasant to the touch that you will forget you are wearing a suit of this thickness.
The DuraSkin outer fabric, which is highly resistant to abrasion, guarantees the durability of the suit and will allow you to enjoy your surfing wetsuit and the waves for much longer. The inner taping also reinforces the seams and the Shield + panels in the knees prevent wear in such heavy-traffic areas.
Neoprene can be damaged by excess salt or other chemicals such as chlorine if used in swimming pools. We recommend washing your wetsuit with plenty of water after use. A small amount of neutral pH soap can be used and then rinsed out afterwards.
Once clean, be sure to prevent it from holding on to too much moisture. Air dry it outside or in a ventilated indoor space, somewhere without direct exposure to sunlight as this can damage its materials.
Storing your wetsuit properly keeps the materials and seams from creasing and being strained for long periods of time. It also prevents the material from wrinkling, which can affect both the wetsuit's durability and appearance.
The best way to store a wetsuit is to hang it draped from its waist, so that the most delicate areas such as the shoulders and arms do not have any tension on them.
For wetsuits with very flexible shoulders, (Apex Flex or Apex Flow) it is important not to place them on a hanger from the shoulder area, as this will degrade the elasticity over time. For the rest of the models, a wide hanger can be used, as long as the wetsuit is not strained in the shoulder or neck area.
SOME RECOMMENDATIONS FOR USE
1) Avoid contact between the velcro and the lining of your wetsuit as this will affect the material’s sensitive fibers. Keep the velcro covered with the provided fabric patch or make sure the velcro is fastened, so that the rough part of the velcro won’t damage the inside of the wetsuit.
2) Be careful not to damage the neoprene material with your fingernails while putting on or taking off your wetsuit, as this type of damage is not covered by our warranty policy.
3) Triathlon and open water wetsuits have been designed specifically for surface swimming. We can't guarantee correct performance of the wetsuits for other activities. Any damage to the wetsuit resulting from activities other than surface swimming is not covered by our warranty policy.
4) Avoid scraping your wetsuit against any surface (especially rough surfaces), never lean on any surface with your wetsuit on.
You may also be interested in
Openwater Base Layer Men Neoprene T-Shirt
The Openwater Base layer is a wetsuit top that allows you to swim in cold waters.
Poncho Towel Training Accessory
The Poncho Towel is a training accessory that allows you to change comfortably.