Tango 3:2 Men Surf Wetsuit
Complete your set
The use of Yamamoto neoprene, the GBS seams, its front zip construction and the advanced pattern construction all provide you with the needed elasticity to be able to paddle for hours. Technologies such as DS 40+ are also incorporated in the shoulders and back which allow you to move without restrictions.
The suit's perfect fit in the chest and back is achieved thanks to the use of DS40PF technology, which includes a compressive inner lining. This lining and the Smoothskin finish on the wrists and neck prevent the ingress of water and the formation of air pockets in the wetsuit.
The use of GBS seams covered by inner taping give the Tango 3:2 suit a high level of thermal insulation within its thickness category, preventing the loss of body heat and allowing you to surf for longer.
The DuraSkin outer fabric, which is highly resistant to abrasion, ensures the durability of your suit, despite the many hours you spend on your surfboard. The inner taping also reinforces the seams and the Shield + panels cover and protect the knee area so that you can enjoy your wetsuit for a longer time.
Neoprene can be damaged by excess salt or other chemicals such as chlorine if used in swimming pools. We recommend washing your wetsuit with plenty of water after use. A small amount of neutral pH soap can be used and then rinsed out afterwards.
Once clean, be sure to prevent it from holding on to too much moisture. Air dry it outside or in a ventilated indoor space, somewhere without direct exposure to sunlight as this can damage its materials.
Storing your wetsuit properly keeps the materials and seams from creasing and being strained for long periods of time. It also prevents the material from wrinkling, which can affect both the wetsuit's durability and appearance.
The best way to store a wetsuit is to hang it draped from its waist, so that the most delicate areas such as the shoulders and arms do not have any tension on them.
For wetsuits with very flexible shoulders, (Apex Flex or Apex Flow) it is important not to place them on a hanger from the shoulder area, as this will degrade the elasticity over time. For the rest of the models, a wide hanger can be used, as long as the wetsuit is not strained in the shoulder or neck area.
SOME RECOMMENDATIONS FOR USE
1) Avoid contact between the velcro and the lining of your wetsuit as this will affect the material’s sensitive fibers. Keep the velcro covered with the provided fabric patch or make sure the velcro is fastened, so that the rough part of the velcro won’t damage the inside of the wetsuit.
2) Be careful not to damage the neoprene material with your fingernails while putting on or taking off your wetsuit, as this type of damage is not covered by our warranty policy.
3) Triathlon and open water wetsuits have been designed specifically for surface swimming. We can't guarantee correct performance of the wetsuits for other activities. Any damage to the wetsuit resulting from activities other than surface swimming is not covered by our warranty policy.
4) Avoid scraping your wetsuit against any surface (especially rough surfaces), never lean on any surface with your wetsuit on.
You may also be interested in
Openwater Base Layer Men Neoprene T-Shirt
The Openwater Base layer is a wetsuit top that allows you to swim in cold waters.
Poncho Towel Training Accessory
The Poncho Towel is a training accessory that allows you to change comfortably.