- Home
- Features and Technology
Features and Technology
AEROSKN™
The fastest fabric in triathlon, Orca’s new AeroSkn revolutionizes triathlon apparel construction. The face side of AeroSkn has an incredibly low drag coefficient, meaning superior aero and hydrodynamics. The back of AeroSkn includes high stretch fabric and a water resistant treatment to ensure 100% water resistance. Approved by FINA, AeroSkn is placed strategically on garments to make significant time savings through the swim, bike and run.
SUPERIOR AERO/HYDRODYNAMICS I 100% WATER RESISTANT I HIGH STRETCH
AQUA GLIDE
Orca Aqua Glide has been re-engineered as a higher gauge fabric – a tighter knit, for lighter, more breathable comfort and increased durability. Water resistant qualities promote speed through the water, while minimising water absorption. Featuring Lycra inside a polyamide yarn for extra defence against chlorine and bacteria, Aqua Glide keeps athletes cool, dry and comfortable.
HIGH GAUGE FABRIC I WATER RESISTANT = SPEED THROUGH WATER
DRI LITE™
Orca DriLite™ is constructed of a micro-fibre polyester, making this one of the most technically advanced garment fabrics on the market. DriLite™ uses two different deniers of fi bre in its construction, which enhances directional wicking whereby finer fibres on the outer surface effectively pull moisture away from the inner surface of slightly denser fi bres, resulting in excellent moisture management and additional benefi ts of lightness and next-to-skin comfort. Breathable and fast drying, DriLite™ is a durable anti-static fabric, perfect for training and competition.
MOISTURE WICKING I FAST DRYING I ANTI-STATIC
DRISHELL™
Using the latest generation of woven fabrics, Orca DriShell uses technically advanced hollow core fiber yarn. DriShell is lightweight, dries more quickly than other fabrics and is anti-static, making it incredibly comfortable.
ANTI-STATIC I MOISTURE WICKING I QUICK DRY
FORM™
Designed to act as a close-wearing, next-to-skin fabric, Form™ stretches and contracts with the wearer’s movements. The fabric weave is tight yet breathable, providing a balance of stretch and compression to hold muscles fi rmly in place. This reduces muscle vibration, a major cause of muscle fatigue – resulting in less exertion with more energy to invest into overall output. Orca Form™ stretches and recovers with every motion providing superior comfort and fit for both training and racing
COMPRESSION I BREATHABLE
FORM+™
Superior compression technology using Orca’s highest grade Form+™ fabric. The fabric weave is tight, yet breathable, with a higher number of contoured panels to provide an optimum balance of stretch and compression. Muscles are held firmly in place, reducing muscle vibration – a major cause of muscle fatigue. More energy is available to be invested in overall output with less exertion. Orca’s top of the range Form+™ fabric generates increased performance for discerning athletes used to training over longer distances.
HIGH GRADE COMPRESSION FABRIC I BREATHABLE
AEROSKN™
The fastest fabric in triathlon, Orca’s new AeroSkn revolutionizes triathlon apparel construction. The face side of AeroSkn has an incredibly low drag coeffi cient, meaning superior aero and hydrodynamics. The back of AeroSkn includes high stretch fabric and a water resistant treatment to ensure 100% water resistance. Approved by FINA, AeroSkn is placed strategically on garments to make significant time savings through the swim, bike and run.
SUPERIOR AERO/HYDRODYNAMICS I 100% WATER RESISTANT I HIGH STRETCH
AQUA GLIDE
Orca Aqua Glide has been re-engineered as a higher gauge fabric – a tighter knit, for lighter, more breathable comfort and increased durability. Water resistant qualities promote speed through the water, while minimising water absorption. Featuring Lycra inside a polyamide yarn for extra defence against chlorine and bacteria, Aqua Glide keeps athletes cool, dry and comfortable.
HIGH GAUGE FABRIC I WATER RESISTANT = SPEED THROUGH WATER
DRI LITE™
Orca DriLite™ is constructed of a micro-fi bre polyester, making this one of the most technically advanced garment fabrics on the market. DriLite™ uses two different deniers of fibre in its construction, which enhances directional wicking whereby finer fibres on the outer surface effectively pull moisture away from the inner surface of slightly denser fi bres, resulting in excellent moisture management and additional benefi ts of lightness and next-to-skin comfort. Breathable and fast drying, DriLite™ is a durable anti-static fabric, perfect for training and competition.
MOISTURE WICKING I FAST DRYING I ANTI-STATIC
DRISHELL™
Using the latest generation of woven fabrics, Orca DriShell uses technically advanced hollow core fi ber yarn. DriShell is lightweight, dries more quickly than other fabrics and is anti-static, making it incredibly comfortable.
ANTI-STATIC I MOISTURE WICKING I QUICK DRY
KILLASKN ™
When Orca first introduced KillaSkn it created a following around the world with triathletes who recognised the benefits the unique 40 gauge fabric brings to competition. Orca has now refined KillaSkn so that the knitted fabric is more densely woven, lighter and more water repellent than other triathlon fabrics. The infused water repellent treatment creates less drag, increasing speed through the water and reducing friction on the bike and run. KillaSkn is ultra thin and highly breathable, acting as a super fast second skin for triathletes.
40 GAUGE I LIGHT I HIGHLY BREATHABLE I WATER REPELLENT
SHAPE™
Designed for maximum comfort and freedom of movement, athletes will appreciate Orca Shape before, during and after training. The brushed, stretch-knit fabric moves fluidly with the wearer, whilst providing moisture-wicking properties.
NEXT-TO-SKIN COMFORT I MOISTURE WICKING
VAPOUR
A breakthrough in moisture management, Orca Vapour is a light, breathable fabric used in key moisture transfer panels of garment construction. With a high moisture vapour transmission rate – the rate at which moisture passes through the fabric and away from the skin – Vapour represents an addition to signature Orca performance materials designed to maximise output with comfort.
LIGHT AND BREATHABLE I HIGH MOISTURE TRANSMISSON RATE
WAVE
Using advanced polymer technology Orca Wave is a performance level, chlorine-resistant fabric. Constructed from a combination of nylon and XTRA-LIFE LYCRA®, Wave has excellent stretch and recovery, and anti-snag properties, is UV resistant, durable and easy care, making it perfect for regular use in the pool or open water.
CHLORINE RESISTANT I ANTI-SNAG I DURABLE I EXCELLENT I STRETCH AND RECOVERY
INVISIBLE ZIP
A 2-coil zipper which is virtually invisible in its placement and functions as a water-seal zip as well as a ventilation mechanism on the bike and run.
2 COIL ZIP I WATER-TIGHT I VIRTUALLY INVISIBLE
INTERNAL SPORTS DRAW CORD
The internal sports draw cord sits within an elasticated band for firm placement and next-to-skin comfort.
SITS WITHIN ELASTICATED BAND I FIRM PLACEMENT
INTERNAL FRONT LINING
Anti-bacterial lining used in the front panels of the Tri Briefs and Race Tri Swimsuit provides additional coverage and next-to-skin comfort.
ANTI-BACTERIAL I NEXT TO SKIN COMFORT
INTERNAL SUPPORT
Crafted with lightweight TriCot polyester and moisture wicking properties, the internal support system provides secure comfort for active ladies.
INCREASED SUPPORT I MOISTURE WICKING
MICRO-FLEECE CHAMOIS
An ultra-thin, non-absorbent micro-fleece chamois which provides comfort and moisture management.
NON - ABSORBENT I IMPROVES MOISTURE MANAGEMENT
MOISTURE TRANSFER PANEL
Constructed of the Vapour fabric, moisture transfer panelling is used in key panels of the Race and 226 ranges garments to enhance moisture management and increase the rate at which moisture is wicked away from the skin and passes through the fabric.
LIGHT AND BREATHABLE I WICKS MOISTURE AWAY FROM SKIN
AQUA POCKETS
Integrated into the garments rear paneling, the aqua pocket consists of a unique, streamlined overlapping seam providing storage for gels and other race nutrition that won’t slow you down in the water.
UNIQUE DESIGN I STORE RACE NUTRITION I POSITIONED IN NATURALLY OCCURING AIR POCKET
BONDED HYDROSEAMS
Thermo-plastic tape is applied to finished fabric edges to effectively seal the fabric join, preventing water entry, and also avoiding piercing the waterproof fabric with standard stitching methods. The result is an extremely flexible, and water-tight, non-stitched seam which sits flat against the skin promoting comfort and streamlined finish.
NON STITCHED SEAMS I WATER TIGHT I FLEXIBLE I STREAMLINED
CONCEALED ZIP
A 2-coil zipper which sits slightly raised on the garment and functions as a water-seal zip in the swim as well as a ventilation mechanism on the bike and run.
2 COIL ZIP I WATER-TIGHT I SITS SLIGHTLY RAISED
CONTROL ZIP
A 3-coil zipper with a control mechanism which locks the zip at any chosen point for water-seal in the swim, or breathability on the bike and run. This mechanism also allows for a quick-release unlock function.
3 COIL ZIP I LOCKS AT ANY POINT I QUICK RELEASE
FLATLOCK STITCHING
A stitching technique which joins fabrics edge to edge, resulting in a low bulk, fl exible stretch seam which sits comfortably against the skin.
FLEXIBLE STRETCH SEAM I NEXT TO SKIN COMFORT
INFUSED WATER RESISTANT
This is the result of a process which makes fabric waterproof by applying a liquid compound directly onto the fabric surface, then applying heat pressure to infuse the coating into the fabric. This process is carried out in a series of very thin layers, which then dry to form an infused waterproof, yet flexible, lightweight and breathable barrier against water entry.
WATERPROOF I FLEXIBLE I BREATHABLE
SHIELD™
Providing a barrier against the wind and rain, whilst remaining light-weight and breathable, Orca Shield is the perfect solution when conditions are changeable. The water resistant fabric is ideal for garments that need to be quick to put on or removed, compacted and stored.
LIGHT WEIGHT I BREATHABLE I WATER RESISTANT
TRISKN™
A five-step manufacturing process, involving two layers of water resistant silicone coating, fused elastane and polyester yarn is used to create TriSkn™ – one of the most water-resistant performance fabrics in the world. Fabric construction allows sweat particles to be transported away from the body, providing the wearer with excellent moisture management. In TriSkn™ athletes swim faster with less drag in the water, while remaining dry and cool on the bike and run.
MOST ADVANCED WATER RESISTANCE I LESS DRAG I MOISTURE WICKING
TRISKN ECLIPSE™
Orca’s TriSkn Eclipse utlises an innovative new “non see-through when wet fabric”, allowing it to be used in confidence in areas that will come into contact with moisture. The bi-component structure of the yarn means a full-dull polyester core is covered with a thin layer of cationic polyester, preventing the see-through nature of many light coloured fabrics, whilst retaining vivid colour. TriSkn Eclipse has 32 gauge construction with infused water repellence, is quick dry wicking, breathable and provides UV protection.
NON SEE-THROUGH WHEN WET I WATER REPELLENT I BREATHABLE I QUICK DRY WICKING
ULTRALITE
Orca’s new UltraLite is constructed from hollow core fibres, making it extremely lightweight, comfortable and durable. The fabric ensures protection from sun with a UV finish, it is moisture wicking and has an anti-bacterial finish.
LIGHTWEIGHT I MOISTURE WICKING I UV PROTECTION I ANTI-BACTERIAL
AQUA POCKETS
Integrated into the garments rear paneling, the aqua pocket consists of a unique, streamlined overlapping seam providing storage for gels and other race nutrition that won’t slow you down in the water.
UNIQUE DESIGN I STORE RACE NUTRITION I POSITIONED IN NATURALLY OCCURING AIR POCKET
BONDED HYDROSEAMS
Thermo-plastic tape is applied to finished fabric edges to effectively seal the fabric join, preventing water entry, and also avoiding piercing the waterproof fabric with standard stitching methods. The result is an extremely flexible, and water-tight, non-stitched seam which sits flat against the skin promoting comfort and streamlined finish.
NON STITCHED SEAMS I WATER TIGHT I FLEXIBLE I STREAMLINED
CONCEALED ZIP
A 2-coil zipper which sits slightly raised on the garment and functions as a water-seal zip in the swim as well as a ventilation mechanism on the bike and run.
2 COIL ZIP I WATER-TIGHT I SITS SLIGHTLY RAISED
CONTROL ZIP
A 3-coil zipper with a control mechanism which locks the zip at any chosen point for water-seal in the swim, or breathability on the bike and run. This mechanism also allows for a quick-release unlock function.
3 COIL ZIP I LOCKS AT ANY POINT I QUICK RELEASE
FLATLOCK STITCHING
A stitching technique which joins fabrics edge to edge, resulting in a low bulk, fl exible stretch seam which sits comfortably against the skin.
FLEXIBLE STRETCH SEAM I NEXT TO SKIN COMFORT
INFUSED WATER RESISTANT
This is the result of a process which makes fabric waterproof by applying a liquid compound directly onto the fabric surface, then applying heat pressure to infuse the coating into the fabric. This process is carried out in a series of very thin layers, which then dry to form an infused waterproof, yet flexible, lightweight and breathable barrier against water entry.
WATERPROOF I FLEXIBLE I BREATHABLE
PERFORMANCE SPORTS DRAW CORD
Rubber backing ensures this thin line performance sports draw cord sits fi rmly and comfortably against the skin.
RUBBER BACKING I SITS COMFORTABLY AGAINST SKIN
SAFETY REFLECTIVE
Strategically placed refl ective logos, prints and JRC Piping ensure you can train confi dently in low light conditions.
INCREASED VISIBILITY IN LOW LIGHT CONDITIONS
STRETCH-MESH BACK PANEL
The stretch-mesh back panel as used in select Race range garments is designed to provide breathability and additional ventilation where the wearer needs it most.
BREATHABLE I INCREASED VENTILATION
TRI TECH CHAMOIS
The High Tech Tri Chamois is constructed from a multi-level seamless pad, which features extra elasticity and optimum shock absorption. The chamois moulds to individual body contours, is hyper-allergenic and anti-bacterial and rapidly absorbs sweat.
SEAMLESS FOR EXTRA COMFORT I ANTI-BACTERIAL TREATMENT I RAPID SWEAT ABSORPTION
WATER RESISTANT
A chemical finish applied to fabric with the purpose of creating a resistance to water absorption or entry. This results in drops of water ‘beading up’ and effectively rolling off the fabric, rather than soaking in.
WATER RESISTANT I WATER BEADS ON SURFACE